Renewable Energy Made Simple
 

 

The AIR is by far the world’s number one selling small wind turbine. In late 2001 we introduced an entirely new level of technology which previously was only found in today's state-of-the-art mega-watt-class wind turbines.

The AIR-X incorporates a new microprocessor based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.

The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.

Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.

Improved battery charging: Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.


 WHERE AND HOW THE AIR-X WIND MODULE IS USED

  • The AIR-X is an ideal product for the person that needs a little power for basic

     appliances such as TV, radio and a few lights.

  • Common applications for the AIR-X

  • Remote Cabins

  • Telecommunication Towers

  • The Developing World

  • Monitoring Stations

Features

  • Unprecedented 3-YEAR WARRANTY
  • Carbon Fiber Composite Blades
  • Aircraft quality aluminum alloy castings
  • Exclusive Brush-less neodymium cubic curve alternator
  • Sophisticated internal battery charge regulator
  • Maintenance-free - Only two moving parts

Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and reducing noise.

AIR XManual Spec Sheet  

The AIR Marine is by far the world’s number one selling small wind turbine for Sailboats. In late 2001 we introduced an entirely new level of technology which previously was only found in today's state-of-the-art mega-watt-class wind turbines.

The AIR Marine incorporates a new microprocessor based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.

The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.

Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). AIR Marine’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR Marine will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.

Improved battery charging: Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR Marine’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR Marine’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR Marine will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.

Corrosion Resistance: Acid etched castings, double coated with marine grade powder coat for superior protection from the environment.

  • Acid etched castings double coated with marine grade powder coat for
    superior protection from the environment.
  • Anodized hub
  • Tuff-Gel coated fasteners to prevent seizing of components
  • Tin plated wires
  • Sealed alternator

Features

  • Unprecedented 3 YEAR WARRANTY
  • Carbon Fiber Composite Blades
  • Aircraft quality aluminum alloy castings
  • Exclusive Brush-less neodymium based sealed alternator
  • Sophisticated internal battery charge regulator
  • Maintenance-free - Only two moving parts
  • Full Marine Tower Kit available for easy mounting on sailboats.
  • Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and eliminating noise.
  • Marine powder coating and stainless steel fittings for corrosion protection in a marine environment
  • High Wind Safe Mode - Automatically slows turbine in potentially damaging winds. Reduces noise and distractions for peace-of-mind when on or off your boat.
    Brochure Manual Spec Sheet  

 

The Air Industrial is a wind turbine capable of resisting the harsh environments that generallyaccompany mountaintop repeater sites and off shore platforms. Southwest Windpower's engineers spent two years in research with companies such as Chevron, Texaco and Cellular One to design a product capable of reliability producing power for remote sites.

Combining wind and photovoltaics in hybrid systems are quickly becoming the standard in renewable energy installations. This is due to seasonal fluctuations of both wind and solar energy resources that make it an ideal combination.

Maintenance-free performance, easy installation, and high output make AIR Industrial ideal for virtually any remote battery charging application. Installations range from Arctica to Antarctica.

Features

  • Unprecedented 3 YEAR WARRANTY

  • Simple installation; no tower is necessary. Can be attached to existing towers.

  • Variable pitch Aerolastic carbon matrix blades

  • Aircraft quality aluminum alloy castings

  • Brush-less neodymium cubic curve alternator

  • Maintenance-free - Only two moving parts

  • Finned aluminum heat sink for maxim cooling effect in high wind average areas

  • Upgraded electronics and wiring for improved reliability over standard models

  • Externally regulated controller designed for rugged environments

  • Quality powder coated aluminum body, all stainless steel hardware